Тоб додан & зарф барои мошин тазриќї - Чин Zhoushan Hina Mach

Тоб додан & зарф барои мошин тазриќї

Кӯтоҳ Тавсифи:

We can manufacture all kinds of screws and barrels for injection molding machine!
For inquiry, please send us diameter and length(or L/D) of screw, outer diameter of barrel.


  • Transportation: By Air, Sea, Express, Train, Truck
  • Шартҳои пардохт: T/T, Western Union, PayPal
  • Document: Certificate, Transportation bill
  • Production time: 18 to 30 days
  • Detail Маҳсулоти

    We can manufacture all kinds of screws and barrels for injection molding machine!
    We have a lot of drawings for screws of Chinese injection machines!
    Screw diameter: Ø20-Ø220
    Mould clamping force: 250TONS-3200TONS
    Shot weight: 30-30000G
     
    Параметри техникӣ:
    Hardness After Hardening & Tempering: HB280-320
    Nitrided hardness: 950-1100HV
    Nitrided layer depth:0.50-0.80mm
    Nitrided brittleness: Less than 2 level
    Surface roughness: Ra 0.4μm
    Linearity of screw: 0.015mm/m
    Bimetallic layer depth: ≥3mm
    Bimetallic hardness: HRC60-72
    Hard-chrome plating hardness after nitriding: ≥950HV
    Chrome-plating layer depth: 0.025~0.10mm
     
    Маводҳо:
    High-quality alloy steel
    38CrMoAlA (JIS SACM645)
    42CrMo (AISI 4140)
    Cr12MoV
    SKD-11 (Cr12MoV)
    SKD-61 (4Cr5MoSiV1)
     
    Технологияҳои:
    Nitriding
    Hard chrome plating
    High-frequency quenching
    Alloy powder spray welding
     
    Five Steps to place an order:  
    Step 1. Inquiry.
    Send us diameter and length(or L/D) of screw, outer diameter of barrel.
    For screw of Chinese injection machine, please send us the machine model and diameter of screw(We have a lot of drawings for screw of injection machine).
    If you have drawing or draft, please send us! That will save a lot of your time!     
    Step 2. Quotation & Contract
    Our manager will send you a quotation.
    After confirming the quotation by you, we will send you invoice and contract for payment.    
    Step 3. Drawing
    Our specialist will design drawings and send you for confirming.
    Drawings are made by Auto CAD.
    Step 4. Production
    Production time from 18 to 30 days, depend on complexity of screw and barrel.
    Step 5. Inspection & Delivery
    After production we will check the hardness and sizes, send you photoes of screw and barrel.
    With rich experiences in shipment we can offer the best delivery plan for you.

  • Гузашта:
  • Next:

  • 0000

  • 
    Сайтҳо Chat дар сомона!