фуруд

How are we working? After placing an order at HinaMach you will be assisted by a personal manager,which will monitor  the entire process and regularly inform you about the progress.The main task of personal manager is to ensure strict adherence to deadlines, perfect quality and minimize the cost of the project. This ensures our customers a consistently high quality with minimum investment, which makes cooperation with HinaMach very beneficial for the customers.

6 steps to cooperate with HinaMach

Step 1: Contact us.
Step 2: Tell us the parameters of your screw and your requirements.
Step 3: Visit our company before ordering (if you need it).
Step 4: Order.
Step 5. Monitoring production and quality before shipment.
Step 6. Export – transport.

Our main products:

■ Screw and barrel for injection molding machine
■ Screw and barrel for extruder
■ Bimetallic screw and barrel
■ Conical twin screw and barrel
■ Parallel twin screws and barrel
■ Screw elements and shaft
■ Screws and barrels for rubber processing machine
■ Tie bar
■ Die-head for extruder

When ordering screw and barrel, following points should be considered:

Drawing. If you have drawings of screw and barrel, it would be good, and this will save your valuable time! Unless you have a drawing and an inability to make drawing your specialists, we are ready to make a drawing for you.
Processed material. This is very important for the production of screws and barrels, conventional recyclable materials: PP, PC, PA, PE, ABS, PS, PVC, PMMA, LDPE, HDPE, EVA, PET etc. There are still some questions about recyclable materials, such as: fresh material or recyled material? Use talc, glass, calcium carbonate powder?
Delivery time: normally 25-35 days, depending on the complexity of screw and barrel.

Questions and answers:

Question: where is HinaMach?
Answer: our company located in Zhoushan city, China, which is close to Shanghai and Ningbo, 280 km from Shanghai, 100 km from Ningbo. If you plan to visit our factory, we are ready to pick you up at Ningbo or Shanghai.

Question: why screw and barrel of HinaMach are inexpensive, compare with others suppliers?
Answer: around 70% screws and barrels of the world are manufactured in China, and 70% of Chinese screws and barrels are manufactured in our city. Extensive experience and scale of production allow us to get reliable raw materials at a low price in the shortest time, so that we can provide inexpensive screw and barrel with reliable quality and shortest delivery time. Moreover, factory direct also ensure that our price is competitive!

Question: how to confirm that the quality of screw and barrel from HinaMach are reliable?
Steel: we always purchase steel from reliable steel plant, which has worked with us for many years.
Technological process: Blanking – Tempering treatment(72 hours) – Rough turning – Finishing turning – Milling thread – Polishing thread – Grinding screw –Nitriding treatment(120 hours) – Straightening treatment – Final polishing – Final Grinding – Detecting – Packaging – Delivery. Every screw and barrel from Hina has passed through this technological process(except special screw and barrel).
Experience: we have been dedicated in designing and manufacturing screws and barrels for over 30 years, such long period for the production of screws and barrels allow us to provide reliable quality!

Question: how to confirm that the screw and barrel from HinaMach are suited for our machine?
Answer: we have a large drawing base, in 30 years of manufacturing screws and barrels we have collected a lot of drawings for machines of Haitian, BEX, KMD, CMT, AMUT, Weber, ChenHsong, ChenDe, Tedric, JSW, ect.
Engineer of Hina also is ready to make drawing for you.
Before manufacturing we will confirm drawing and all technical details with you!

Question: how does HinaMach package the screw and barrel?
Answer: we use Polywood case for packaging, before packaging rust preventing oil and wrap protective film.

Question: can I order just one screw or barrel?
Answer: yes, you can!

Question: we didn’t work with Chinese factory before, don’t know how to purchase goods from China.
Answer: we have worked with foreign customers for many years, experienced managers in company HinaMach will help you complete deal from the beginning to the end!

Question: what kind of steel are screw and barrel of HinaMach made from?
Answer: normal screw and barrel of Hina are made from 38CrMoAla. For special processing plastic like PA, PC with above 30%GF, we recommend screw and barrel made from SKD61, DC53, SKH55(YXM4), EFZD ,GH113. According to your processing plastic our Engineer will provide you the best proposal!

Question: could HinaMach supply others Accessories for Injection Machine or Extruder? For example heater, gearbox, die-head, screen changer?
Answer: sure, we can supply others accessories for Injection Machine or Extruder, many years in area of plastics machinery allow us to get a lot of reliable suppliers, which have worked with us for many years!

Question: how to contact with HinaMach?
Answer: you can send us Email, call us, or just inquiry on the website, See the contact information on the page of “Contact Us”!

Please feel free to contact with us!

 

 



Сайтҳо Chat дар сомона!